| Availability: | |
|---|---|
| Quantity: | |
The JME2 Series Straight Side Double-Point Mechanical Press is designed for precision metal stamping applications requiring high frame rigidity, stable slide guidance, and resistance to off-center loading.
Unlike a conventional single-point press, the JME2 Series uses a double-point drive configuration with counter-rotating crankshafts. This arrangement helps counteract lateral forces generated during press operation and improves stability when the stamping load is not perfectly centered.
The welded steel structure provides the rigid foundation required for repeated stamping operations, while the extended rectangular six-sided guide system supports stable slide movement throughout the stroke.
With models ranging from JME2-110 to JME2-630, users can select different press capacities, stroke lengths, die heights, table dimensions, and stroke rates according to tooling and production requirements. The supplied technical data specifies JIS 1st Class press precision across the series.
The JME2 Series is specified to meet JIS 1st Class press precision, supporting applications where consistent slide movement and die alignment are important for stable stamping quality.
The press body uses a welded steel plate structure designed to provide the rigidity required for repeated industrial stamping operations.
A rigid frame is particularly important when working with wider dies or uneven load distribution because excessive frame deflection can affect tooling alignment and forming consistency.
Counter-rotating dual crankshafts help counteract lateral forces during operation.
This is one of the most important structural advantages of the JME2 Series
The drive and frame configuration provides strong resistance to left and right off-center loading.
For manufacturers using larger dies or workpieces where forming forces are not always perfectly centered, this is a more meaningful purchasing point than generic descriptions such as “heavy-duty construction.”
High-precision rectangular six-sided extended guide rails provide a larger guiding area for slide movement and support stable press operation.
This type of guide structure also aligns with the way established press manufacturers discuss slide stability and guiding accuracy. Komatsu, for example, prominently presents guide area and off-center-load performance when explaining its straight-side press design.
The JME2 Series incorporates a user-friendly human-machine interface for operating and monitoring the press.
The page should focus on usability rather than adding unsupported claims such as touchscreen specifications, job-memory capacity, automatic diagnostics, or specific PLC brands.
Model/name/Specification | Unit | JME2-110 | JME2-160 | JME2-200 | JME2-260 | JME2-315 | JME2-400 | JME2-500 | JME2-630 | ||||||||
Norminal capacity | KN | 1100 | 1600 | 2000 | 2600 | 3150 | 4000 | 5000 | 6300 | ||||||||
Model | V | H | V | H | V | H | V | H | V | H | small table | large table | small table | large table | small table | large table | |
Norminal capacity stroke | mm | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3 | 7 | 3 | 7 | 10 | 10 | 10 | 10 | 10 |
Stroke of slide | mm | 180 | 110 | 180 | 130 | 250 | 150 | 280 | 170 | 300 | 170 | 300 | 300 | 300 | 300 | 300 | 300 |
Strokes per minute | s.p.m | 30-65 | 50-100 | 30-55 | 40-85 | 20-50 | 35-70 | 20-40 | 30-60 | 20-35 | 30-50 | 20-35 | 15-25 | 20-35 | 20-35 | 20-35 | 20-35 |
Max die set height | mm | 400 | 350 | 450 | 400 | 500 | 450 | 550 | 450 | 550 | 450 | 550 | 550 | 600 | 600 | 600 | 600 |
Die height adjustment | mm | 100 | 100 | 120 | 120 | 120 | 120 | 120 | 120 | ||||||||
Bottom area of slide(L/R+F/B) | mm | 1450×550 | 1650×650 | 1900×750 | 2450×900 | 2450×900 | 2720×1000 | 3100×1000 | 2700×1100 | 3200×1100 | 2840×1100 | 3200×1100 | |||||
Worktable size(L/R+F/B) | mm | 1600×750 | 1850×760 | 2250×940 | 2550×1000 | 2550×1000 | 2800×1100 | 3300×1100 | 2900×1200 | 3300×1200 | 3100×1200 | 3300×1200 | |||||
Opening on uprights(F/B+U/D) | mm | 600×400 | 700×450 | 900×600 | 900×600 | 900×600 | 900×600 | 900×600 | 1000×700 | 1100×700 | 1000×700 | 1100×700 | |||||
Main motor power | Kw | 11 | 15 | 18.5 | 30 | 30 | 37 | 37 | 55 | 75 | |||||||
Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | ||||||||
Press precision | JIS 1stclass 1 | ||||||||||||||||
For larger stamping dies, the load acting on the slide is not always concentrated at one central point.
A double-point press distributes the drive through two connection points, which can provide better slide stability across a wider working area than a comparable single-point configuration.
For the JME2 Series, the counter-rotating crankshaft design further helps counteract lateral forces and improves resistance to left/right off-center loading.
The JME2 Series is designed for sheet-metal stamping and forming operations where press capacity, die dimensions, slide stroke, and production speed need to be matched to the specific tooling.
Typical processes can include:
Blanking and punching
Bending and forming
Shallow drawing
Large-die stamping
Multi-stage metal forming
General sheet-metal component production
Selection should be based on the actual stamping process rather than nominal tonnage alone.
Press Capacity: Determine the maximum forming or punching force required by the part and tooling.
Stroke Length: Select the required slide stroke according to part geometry, feeding method, and die structure.
Stroke Rate: Match the SPM range to production-volume requirements and the forming process.
Die Height: Confirm the maximum die height and adjustment range against the planned tooling.
Worktable Size: Wider or larger dies require sufficient slide and worktable dimensions.
Off-Center Load: For large or asymmetrical tooling, evaluate actual load distribution rather than only total press capacity.
Automation Requirements: If the press will operate with feeders, transfer systems, robots, or progressive dies, confirm the required interfaces and configuration before ordering.
The JME2 Series is a straight-side/gantry double-point mechanical press designed for sheet-metal stamping and forming applications.
The supplied product range covers nominal capacities from 1100kN to 6300kN, from JME2-110 through JME2-630.
The supplied technical data specifies JIS 1st Class press precision.
Its counter-rotating double-crank arrangement is designed to counteract lateral forces and improve stability under left and right off-center loading.
Key factors include required pressing force, stroke, SPM, die height, die dimensions, worktable size, off-center loading, and planned automation configuration.
Automation capability should be confirmed according to the required feeder, transfer, robot, die, and control configuration.Available automation interfaces should be confirmed according to the required production-line configuration.
Choosing a mechanical press requires more than matching nominal capacity. Send us your part drawing, material type and thickness, die dimensions, required press force, target SPM, and automation requirements, and we can help evaluate the appropriate JME2 configuration for your production needs.
