| Availability: | |
|---|---|
| Quantity: | |
The JKE2 Series C-Frame Double Crank Mechanical Press is designed for stamping applications that require a wider die area and improved stability under uneven load distribution.
Compared with a single-crank C-frame press, the double-crank configuration provides two drive points across the slide. The JKE2 further uses counter-rotating dual eccentric shafts to help counteract lateral forces during operation.
This structure makes the series particularly suitable for applications involving wider dies, longer workpieces, progressive tooling, and stamping processes where left/right off-center loading needs to be controlled.
The series covers nominal capacities from 1100kN to 3150kN, with different stroke, speed, die-height, worktable, and machine-size configurations available according to the selected model.
Model/name/Specification | Unit | JKE2-110 | JKE2-160 | JKE2-200 | JKE2-260 | JKE2-315 | |||||
Norminal capacity | kN | 1100 | 1600 | 2000 | 2600 | 3150 | |||||
Model | V | H | V | H | V | H | V | H | V | H | |
Norminal capacity stroke | mm | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3.5 | 7 | 3.5 |
Stroke of slide | mm | 180 | 110 | 200 | 130 | 250 | 150 | 280 | 170 | 300 | 170 |
Strokes per minute | spm | 35-65 | 50-100 | 30-55 | 40-85 | 25-45 | 35-70 | 20-35 | 30-60 | 20-35 | 30-50 |
Max die set height | mm | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 | 550 | 615 |
Die height adjustment | mm | 100 | 100 | 120 | 120 | 120 | |||||
Upper Worktable size(L/R+F/B) | mm | 1400×500×70 | 1600×550×70 | 1850×650×95 | 2100×700×95 | 2100×700×95 | |||||
Lower Worktable size(L/R+F/B) | mm | 1800×650×130 | 2000×760×150 | 2400×840×170 | 2700×900×170 | 2750×900×190 | |||||
Main motor power | kW/P | 11 | 15 | 18.5 | 22 | 30 | |||||
Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |||||
Press precision | JIS 1stclass | ||||||||||
Machine dimension | mm | 2000×1745×3059 | 2200×1940×3709 | 2620×2235×3849 | 3000×2545×4304 | 3010×2545×4689 | |||||
Die cushion roof area | mm2 | 350×235×2 Unit | 410×260×2 Unit | 540×350×2Unit | 640×470×2 Unit | 640×470×2 Unit | |||||
The JKE2 Series uses a C-frame double crank drive configuration designed to provide a wider working area than a comparable single-crank press.
Two drive points distribute the mechanical force across the slide, making the structure suitable for wider dies and longer sheet-metal parts.
For buyers using larger progressive dies or workpieces extending across the left-right direction of the bolster, this structural layout is a key selection advantage.
One of the core design features of the JKE2 Series is its resistance to left and right off-center loads.
The counter-rotating dual eccentric shafts help offset lateral forces generated during press operation, supporting more stable slide movement when the forming load is not perfectly centered.
This feature is particularly relevant for:
Wide stamping dies
Progressive dies
Long sheet-metal parts
Multi-position tooling
Applications where load distribution changes across the die
The JKE2 Series uses high-precision rectangular six-sided extended guide rails to support slide alignment throughout the press stroke.
A larger guide contact area helps control lateral slide movement and is especially important in double-crank presses where wider tooling may generate uneven forces across the slide.
This is also a common selling point among established C-frame two-point press manufacturers.
The complete JKE2 Series is specified with Japan JIS 1st Class press precision.
This precision level provides the mechanical foundation for stamping applications where stable slide movement, die alignment, and repeatable forming conditions are important.
However, final part accuracy still depends on multiple factors, including:
Tooling condition
Material properties
Die alignment
Load distribution
Press setup
Feeding accuracy
这款JKE2比JME1更适合突出 Wide Bed / Progressive Die / Longer Parts。
Suitable for brackets, reinforcing parts, covers, and other sheet-metal components produced with medium-to-large dies.
Suitable for appliance panels, structural brackets, internal sheet-metal parts, and other stamped hardware.
The wider bed and double-crank drive configuration make the JKE2 suitable for evaluating progressive-die applications where tooling extends across a larger left-right working area.
Can be used for enclosures, brackets, frames, covers, and general sheet-metal components.
The two-point drive and wide worktable configuration make the press relevant for longer parts requiring more evenly distributed support across the slide.
Different JKE2 configurations provide alternative slide strokes, operating speeds, and die heights to match different stamping requirements.
In general:
Shorter Stroke / Higher Speed Configuration
Suitable for applications requiring higher cycle rates and relatively shorter forming movement.
Longer Stroke / Lower Speed Configuration
Suitable for parts and tooling requiring greater slide travel and additional die clearance.
Calculate the maximum punching or forming force required by the material and tooling.
Because the JKE2 is a double-crank wide-bed press, die width should be evaluated together with nominal press capacity.
Choose the appropriate V/H configuration according to forming depth, feeding clearance, and die structure.
Match the available speed range to the target production output and forming process.
Confirm both maximum die height and adjustment range.
Check the die footprint against both slide and bolster dimensions before selecting a model.
For dies with uneven force distribution, provide the expected load position and forming-force distribution during technical evaluation.
The supplied JKE2 specifications include die cushion roof-area data, so cushion requirements should be confirmed according to the forming process and tooling design.
The JKE2 can be evaluated for use with automated stamping systems depending on the required project configuration.
Typical associated equipment may include:
Coil feeders
Straighteners
Decoilers
Progressive dies
Transfer systems
Robotic loading systems
Part conveyors
The JKE2 Series is a C-frame double crank mechanical press, also commonly described as a two-point gap-frame mechanical press.
The series covers 1100kN to 3150kN, from JKE2-110 through JKE2-315.
The JKE2 Series is specified with Japan JIS 1st Class press precision.
The two-point drive provides better support across a wider slide and is suitable for wider dies and applications where left/right load distribution needs to be considered.
Its counter-rotating dual eccentric shafts are designed to help offset lateral forces and improve stability under left/right off-center loading.
The wide worktable and double-crank architecture make it suitable for evaluating progressive-die applications, depending on die dimensions, feeding method, required force, and production speed.
Provide:
Part drawing
Material type
Material thickness
Required pressing force
Die dimensions
Target SPM
Required stroke
Off-center load condition
Feeding or automation requirements
