| Availability: | |
|---|---|
| Quantity: | |
The SME2 Series Gantry Double-Point Servo Press is designed for manufacturers requiring flexible slide motion, precise forming control, and a wide working area for sheet metal stamping applications.
Unlike a conventional mechanical press operating with a fixed crank motion, the SME2 uses a specialized low-speed, high-torque servo motor that allows the slide motion profile to be adjusted according to the forming process.
Stroke height, slide speed, and motion sequence can be programmed to suit different dies, materials, and production requirements. This gives manufacturers greater flexibility when handling blanking, forming, drawing, and other stamping processes.
The series covers nominal capacities from 1100kN to 6300kN, with multiple slide, worktable, die cushion, and torque configurations available across the SME2-110 to SME2-630 range.
This basic positioning is consistent with the manufacturer's current Gantry Double-Point Servo Press description.
Model/name/Specification | Unit | SME2-110 | SME2-160 | SME2-200 | SME2-260 | SME2-315 | SME2-400 | SME2-500 | SME2-630 |
Norminal capacity | kN | 1100 | 1600 | 2000 | 2600 | 3150 | 4000 | 5000 | 6300 |
Norminal capacity stroke | mm | 5 | 6 | 6 | 7 | 7 | 10 | 10 | 10 |
Stroke of slide | mm | 180 | 180 | 250 | 280 | 300 | 300 | 300 | 300 |
Max no-load strokes per minute | spm | 65 | 55 | 50 | 40 | 30 | 30 | 30 | 30 |
Max die set height | mm | 400 | 450 | 500 | 550 | 550 | 550 | 600 | 600 |
Die height adjustment | mm | 100 | 100 | 120 | 120 | 120 | 120 | 120 | 120 |
Bottom area of slide(L/R+F/B) | mm | 1450×550 | 1650×650 | 1900×750 | 2450×900 | 2450×900 | 2800×1400 | 3200×1100 | 3200×1200 |
Worktable size(L/R+F/B) | mm | 1600×750 | 1850×760 | 2250×940 | 2550×1000 | 2550×1000 | 2900×1400 | 3300×1200 | 3300×1300 |
Opening on uprights(F/B+U/D) | mm | 600×400 | 700×450 | 900×600 | 900×600 | 900×600 | 1100×600 | 1100×700 | 1100×700 |
Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
Press precision | JIS 1stclass | ||||||||
Machine dimension(L×W×H) | mm | 2280×1236×3180 | 2590×1450×3757 | 3000×1600×3860 | 3600×1770×4749 | 3900×3080×4965 | 4100×3200×5260 | 4500×2100×5670 | 4600×2125×5670 |
Air bag type die cushion capacity | kN | 40 | 60 | 80 | 100 | 100 | 140 | 140 | 140 |
Air bag type die cushion stroke | mm | 80 | 90 | 90 | 100 | 100 | 100 | 100 | 100 |
Air cylinder type die cushion capacity | kN | 55 | 80 | 100 | 125 | 125 | 125 | 140 | 150 |
Air cylinder type die cushion stroke | mm | 70 | 80 | 90 | 100 | 100 | 100 | 100 | 100 |
Max torque value | N·m | 5500 | 9000 | 12000 | 14000 | 18000 | 12000×2 | 14000×2 | 18000×2 |
Note: other parameter or machine model can be customized by consulting seller.
The SME2 Series is equipped with a specialized low-speed, high-torque servo motor designed specifically for press operation.
Unlike a conventional flywheel-driven press with a largely fixed slide-motion characteristic, the servo drive allows the machine to change slide speed according to the requirements of different stages of the forming cycle.
This flexibility is particularly useful when a process benefits from:
Faster approach movement
Reduced forming speed
Controlled motion near bottom dead center
Adjustable return speed
Different stroke profiles for different dies
AIDA similarly makes programmable position, velocity and dwell one of the core differentiators of its servo presses, while SEYI also positions programmable servo motion as a key forming advantage.
The SME2 servo control system allows the motion profile to be configured and modified according to the stamping process.
Stroke height and motion sequence can also be programmed, allowing one press platform to adapt to different tooling and production requirements.
Typical process considerations may include:
Blanking
Slide speed can be adjusted around the working zone according to material and die requirements.
Forming
Controlled slide velocity can provide additional flexibility during material deformation.
Drawing
A slower forming section can be programmed where the material requires additional control.
Flexible Production
Different stroke and motion configurations can be used for different parts and dies.
The SME2 Series incorporates an automatic bottom dead center compensation function, with the manufacturer specifying compensation precision below 0.01mm for precision stamping applications.
This function helps maintain a controlled slide position around the forming zone, particularly where die setup and process repeatability require closer control of the bottom dead center.
The SME2 allows stepless adjustment of slide operating speed, providing greater process flexibility than a conventional press with a fixed mechanical speed profile.
Different speed settings can be evaluated according to:
Material properties
Part geometry
Tooling requirements
Drawing conditions
Desired production cycle
Part-quality requirements
This is also consistent with the positioning of major international servo press manufacturers.
Depending on the selected SME2 model, air bag die cushion capacities range from 40kN to 140kN, with strokes from 80mm to 100mm based on the supplied table.
Air cylinder die cushion capacities range from 55kN to 150kN, with available strokes from 70mm to 100mm according to model configuration.
The die cushion provides additional forming support for applications where blank holding, drawing resistance, or material-flow control needs to be considered.
The SME2 Series includes a handwheel fine-adjustment function intended to simplify die setup and trial operations. The manufacturer specifically positions this function as a way to shorten die-tryout time.
During setup, fine manual adjustment allows operators to check tooling movement and slide position more carefully before moving into normal production.
The SME2 Series is specified with Japan JIS 1st Class press precision across the model range.
This provides the mechanical precision foundation required for applications involving controlled slide movement and repeatable die operation.
The SME2 Series allows users to program stroke height and motion sequence according to production requirements.
The manufacturer also states that motion curves can be optimized to support improved component quality and longer die service life.
Programmable Stroke Height
Adjust the working stroke according to different tooling and part requirements.
Programmable Motion Sequence
Configure different movement stages according to the stamping process.
Motion Profile Optimization
Adjust the slide profile according to forming requirements.
Flexible Production
Use one servo press platform for different parts, dies and production processes.
Suitable for forming and stamping sheet-metal components where different die processes may benefit from programmable slide motion.
Servo motion control can be evaluated for metal components requiring flexible forming sequences or controlled slide speeds.
Suitable for panel, shell and structural component stamping involving blanking, drawing and forming operations.
Programmable motion profiles can support processes where forming speed and bottom-dead-center control are important.
Can be evaluated for compatible precision forming applications according to material, tooling and required tonnage.
Feature | SME2 Servo Press | Conventional Mechanical Press |
|---|---|---|
Slide Motion | Programmable | Primarily fixed mechanical profile |
Slide Speed | Stepless adjustable | More dependent on fixed drive characteristics |
Stroke Height | Programmable | Limited by mechanical configuration |
Motion Sequence | Programmable | Less flexible |
Bottom Dead Center Compensation | Supported | Depends on machine configuration |
Process Flexibility | High | More process-specific |
Handwheel Fine Adjustment | Supported | Depends on configuration |
Die Cushion | Available by model | Depends on configuration |
Confirm the required blanking, forming or drawing force and select the appropriate nominal capacity.
The SME2 series provides different maximum torque ratings across models, from 5500N·m on SME2-110 to dual-motor torque configurations on larger models.
Select the slide stroke according to part depth, tooling structure and material-feeding clearance.
Confirm that the die fits within the slide-bottom and worktable dimensions.
Determine whether an air-bag or air-cylinder die cushion is required and confirm the necessary capacity and stroke.
Identify whether the process requires variable slide velocity, dwell, shorter programmed strokes or other customized motion sequences.
Compare required output against the maximum no-load stroke rate, while considering the actual programmed servo motion.
For automated stamping lines, confirm material feeding, transfer, robot and peripheral-equipment requirements during project planning.
The SME2 is a gantry double-point servo press designed for flexible metal stamping and forming applications.
The supplied range covers 1100kN to 6300kN, from SME2-110 through SME2-630.
Servo control allows slide motion, speed, stroke height and movement sequence to be adjusted according to the forming process.
Yes. The manufacturer states that motion profiles can be configured and modified during the manufacturing process.
The correct statement is that its automatic bottom dead center compensation precision is below 0.01mm. This should not be interpreted as the overall machine precision specification.
The SME2 is specified with Japan JIS 1st Class press precision.
The supplied specifications include both air-bag and air-cylinder die cushion capacities and strokes depending on model.
It supports more controlled die setup and trial operation, and the manufacturer states that it can reduce die-tryout time.
